Dam safety software, built around the Citation Path.
Piezometer, inclinometer, InSAR, and SCADA data unified through your Digital Twin into a single auditable view. Anomalies surfaced 72 hours before they reach an action level.
A dam is the calmest looking piece of critical infrastructure most people never think about. The reality on the operator side is the opposite. Inspections are quarterly. Sensor readings are constant. Regulators want both, reconciled, with an audit trail. AquaSys AI™ keeps the two in step.
Predictive failure modeling
Geomorphology models trained on global dam-incident data flag anomalies 72+ hours ahead.
Continuous instrumentation fusion
Unify legacy data loggers, modern IoT sensors, and InSAR satellite passes into a single fabric.
Regulatory-grade audit trail
Every alert is signed, reproducible, and FERC Part 12D / ICOLD ready.
Most dam incidents are visible in the data weeks before they happen.
Piezometers drift. Inclinometers tilt. Seepage rates inch up. The pattern is usually there before the threshold trips. What goes missing is the time to stitch it together, the regulator ready audit trail to act on it, and the institutional memory to recognise it as a known pattern.
What the system does.
Sensor and InSAR fusion
Piezometer, inclinometer, weir flow, and InSAR satellite returns are read from your Digital Twin and combined into a single ground truth. Displacement resolves down to 0.1 mm. The model trains on your site, not a generic baseline.
72 hour anomaly detection
Structural anomalies surface up to 72 hours before they reach an action level. Each alert carries its source data, the historical comparison, and the recommended next inspection step.
Regulator ready audit trail
FERC Part 12D and ICOLD protocols are surfaced by the Compliance Agent. Every recommendation is citable back to the source regulation, the source sensor, and the source document. State dam safety reports and water accounting reports are produced as standard.
Geotechnical memory
Decades of inspection reports and design memos are converted into vector form by the Vector Sheet Framework. A question asked in 2026 can be answered with the engineer’s note from 2003, with the page reference attached.
From a pressure spike to a bypass procedure.
- 01
Trigger
A piezometer detects a sudden pressure spike at a dam segment.
- 02
Rationalise
Syfter cross-references the spike with recent rainfall and your Digital Twin to check for structural ground movement.
- 03
Alert
The operator gets a high-priority notice: “Anomaly at Segment B — probable cause: ground saturation,” with the source document referenced.
- 04
Remediate
The operator asks for the emergency bypass procedure, and Syfter pulls the exact page from the digital O&M manual.
How it deploys.
Read only overlay on the existing SCADA and historian. Sovereign deployment in customer VPC or on premise. AES 256, RBAC, SSO and SAML. 30 day pilot, scoped to one asset, with a documented outcome at the end.
Time goes where it matters.
Anomalies surfaced days before they reach an action level, so inspection time goes where it matters — fewer false alarms, and a clearer picture of what is actually moving.
A regulator-ready audit trail produced as a standard output, with every recommendation traceable to its source sensor, document, and regulation.
We’re early — we’ll publish verified results as our pilots produce them, on your asset, never borrowed.
Common questions.
Does AquaSys AI™ replace our existing SCADA?
+No. AquaSys AI™ is a read only overlay. The existing SCADA, historians, and control logic stay exactly where they are. AquaSys AI™ sits on top of them.
How is FERC Part 12D handled?
+The Compliance Agent maintains FERC Part 12D protocols and produces inspection ready reports with full citations. Every action level, every threshold, and every recommendation traces back to the source clause.
What sensors are supported?
+Piezometers, inclinometers, weir flow gauges, accelerometers, and InSAR satellite returns. New sensor types are added through the standard integration kit, not through a custom build.
What does the pilot cover?
+One critical asset, with your Digital Twin integrated within 30 days. Pilot deliverables include a baseline accuracy report, a documented anomaly history, and a regulator ready audit log.
Pick one dam.
We will integrate its Digital Twin in under 30 days, fused across your existing instrumentation, ready for the next FERC cycle.